Home > Invar 42 Sheet and Plate
Russ Nickel Alloys, located in Manila, Philippines, is a reliable manufacturer and supplier of top-notch metal products, including Invar 42 Sheets and Plates. Renowned for their precision, dimensional stability, and dependability, the company produces sheets and plates that adhere to international standards for mechanical performance and thermal properties. Invar 42 Sheets and Plates are specifically designed to have a low coefficient of thermal expansion, making them perfect for applications that require minimal changes in size with temperature shifts. These products deliver long-lasting performance, exceptional stability, and accuracy for aerospace, instrumentation, industrial, and scientific projects.
Invar 42 Sheets and Plates are nickel-iron alloys with about 42% nickel content. This unique composition provides low thermal expansion, outstanding dimensional stability, and solid mechanical strength. They maintain their structural integrity during thermal cycling and resist warping or distortion in precision applications. These sheets and plates are known for their good workability, toughness, and durability, making them ideal for critical aerospace, electronics, and industrial components where thermal stability and mechanical reliability are crucial.
| Standards : | Per Chem Mil-I-23011C CL 7, Boeing D-33028, ASTM B753, ASTM F1684, ASTM F30 |
| Dimensions : | ASTM, ASME, and API |
| Sheets Thickness : | Range from .008″ to .0125″ |
| Shims Thickness : | Range from .01″ to .0125″ |
| Plates Thickness : | Ranges from .0125″ to 5.00″ |
| Sheets/Plates Width : | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets/Plates Length : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers : | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service : | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Element | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Invar 42 | KSI (MPa) 36 / (248) | KSI (MPa) 71 / (490) | 40 % |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
| Density | 0.293 lb/cu in |
| Specific Gravity | 8.12 |
| Curie Temp | 715 oF or 380oC |
| Melting Point | 2600 oF or 1427oC |
| Electrical Resistivity | 66 Micro-ohm-cm or 400 ohm-cir mil/ft |
| Thermal Conductivity | 10.7 W/cm oC or 74.7 BTU-in/sq. ft-hr |
| Specific Heat | 0.12 Cal/g- oC |
| Thermal Expansion | 5.0 ppm / oF (75oF to 842oF) or 9.0 ppm / oC (25oC to 450oC) |
At Russ Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Nimonic Sheet and Plates in Manila, Philippines, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the Philippines, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Invar 42 Sheets and Plates find extensive use in industries where minimal thermal expansion and high dimensional stability are vital. They are commonly utilized in aerospace structures, precision instruments, optical devices, scientific equipment, industrial molds, and high-accuracy mechanical assemblies. These sheets and plates ensure that components retain their exact dimensions despite temperature fluctuations, enhancing performance and reliability. Invar 42 Sheets and Plates from Russ Nickel Alloys provide long-term stability, precision, and efficiency. Their blend of thermal stability, mechanical strength, and durability makes them the go-to choice for demanding aerospace, industrial, and scientific applications.
